Maintenance And Cleaning; Service Centre - Parkside 90575 Operation And Safety Notes

... / Maintenance and cleaning / Service centre
Ask the advice of the retailer when buying solder in order to choose
the most suitable solder for your intended purpose.
Attachments and applications:
ATTENTION! Do not carry out any special changes or repairs to the
electrics or other parts. Exceptions are permitted if the person carrying
out such changes or repairs is qualified or trained to do so.
Try every application out on surplus material and see if you get the effect
you wish to have. This means you will avoid damaging the item you
wish to work on.

Maintenance and cleaning

Q
on the device always pull the mains plug out of the mains socket and
allow the device to cool.
C lean the device after you have finished using it.
U se a cloth and a little mild detergent for cleaning the device.
I n no circumstances use sharp objects, or petrol, solvents or clean-
ing agents that might attack plastic.
D o not allow any liquids to enter the inside of the device.

Service centre

Q
qualified specialist personnel using original manufacturer
parts only. This will ensure that your device remains safe to use.
replaced, always have the replacement carried out
RISK OF INJURY! Before you carry out any work
Have your device repaired only by
If the plug or mains lead needs to be
GB 43