Storage Features - Frigidaire A20811504 Use & Care Manual

Shelves
CAUTION
To avoid personal injury or property
damage, handle tempered glass shelves
carefully. Shelves may break suddenly
if nicked, scratched, or exposed to
sudden temperature change. Allow
the glass shelves to stabilize to room
temperature before cleaning. Do not
wash in the dishwasher.
You can easily adjust shelf positions in
the refrigerator compartments to suit
your needs. The shelves have mounting
brackets that attach to slotted supports
at the rear of each compartment.
To change the position of a shelf
1. Remove all food from the shelf.
2. Lift the front edge up and pull the
shelf out.
3. Replace by inserting the mounting
bracket hooks into the desired
support slots.
4. Lower the shelf and lock
into position.

STORAGE FEATURES

Reposition the Air Seal
For glass shelves:
1. Remove the air seal by pushing the
seal straight back.
2. Position the air seal toward the
outside edge of the shelf to avoid
the air tower when you push the
shelf back into place.
3. Install the seal by sliding the open
channel end of the seal onto the
back edge of the shelf until the seal
sits snug on the back of the shelf
and the flap sits at about a 10° angle
from the shelf surface.
IMPORTANT
Be aware of the air seal located at the
rear of the shelf. Mount shelves located
on the left side with the air seal mount-
ed on the far left side. Mount shelves
located on the right side with the air
seal mounted on the far right side. This
is to ensure there is no interference
with the large air tower on the back
wall of the cabinet. This also applies to
the crispers.
31