Table of Contents
Advertisement
12
DOOR REMOVAL
3. Lightly trace around the door's
top hinges with a pencil. This makes
reinstallation easier.
4. Remove the bulkhead cover at the
rear of the unit to access the water
tubing. Disconnect the water tube
at the push-lock connection on the
rear of the unit below the bulkhead.
The dispenser line is connected to
the yellow water line coming from
the main water valve.
5. Pull the water tube out of the
conduit from the top of the cabinet.
You will be pulling approximately five
feet of water tube from the back of the
refrigerator. Use care while pulling the
water tube from the unit to be sure you
do not kink the tube.
6. Open both doors to a 90° angle.
Press
Press
Set aside the doors in a secure position
where they cannot fall and cause
personal injury or damage the doors
or handles.
NOTE
90˚
CAUTION
P
P
Advertisement
Table of Contents
