Frigidaire A20811504 Use & Care Manual page 9


NOTE
If you place your refrigerator with the
door hinge side against a wall, you may
have to allow additional space so the
door can open wider.
Door opening
Position your refrigerator to allow easy
access to a counter when removing food.
For best use of refrigerator drawers and
freezer baskets, position the refrigerator
in a position where both can fully open.
Cabinet Leveling & Refrigerator
Door Alignment
Guidelines for final positioning
of refrigerator:
• All 4 corners of the cabinet must
rest firmly on the floor.
• Slightly elevate the front to ensure
the doors close and seal properly.
• Align the doors with each other and
level them.
You can meet most of these conditions
by raising or lowering the adjustable
front rollers.
To level the cabinet using the front rollers:
1. Slightly open the freezer drawer to
reveal the adjustable rollers at the
bottom of the cabinet.
2. Use the front roller height adjusting
screws to make initial cabinet
adjustments. Use a ³⁄
wrench to turn the adjustment
screws (1 per side).
To raise the unit: Turn the
adjustment screw clockwise.
To lower the unit: Turn the
adjustment screw counterclockwise.
Anti-tip
Leg
(if necessary)
" socket
8
Raise
Lower
INSTALLATION
3. Ensure both doors are bind-free with
their seals touching the cabinet on all
4 sides and the cabinet is stable.
4. After unit is leveled, lower the anti-
tip leg until it firmly contacts the
floor. An adjustable wrench may be
necessary for adjustment.
Door

NOTE
Product is shipped with doors adjusted
to the lowest position on the hinges.
To make final door height adjustments:
1. Open the freezer drawer to access
hinges for the fresh food doors.
2. Insert the 6 mm Allen
into the shaft of the lower hinge.
(Included with unit)
To lower door: turn the adjustment
screw counterclockwise if looking
at the door from below.
To raise door: turn the adjustment
screw clockwise if looking at the
door from below.
9
Door
wrench
TM