Frigidaire A20811504 Use & Care Manual page 14

14
DOOR REMOVAL

NOTE
Upon replacement, fully insert the tube
up to the marking line.
3. Reinstall the top hinges and screws.
4. Insert and feed the water line back
into the conduit at the top left door
hinge until the tube reappears at the
rear of unit.
5. Reconnect all harnesses.
6. Replace the top hinge covers
and screws.
7. Reconnect the water line to the
push-lock connection and reinstall
the water line bulkhead cover at the
rear of the unit.
8. Reconnect the electrical power cord
to the wall outlet.
To reset the door pin:
If you remove the doors at less than a
40° angle, the pin returns to the home
position. You can reset it by turning the
door upside down and using a 5/32"
Allen wrench to rotate the left hand pin
90° clockwise and the right hand pin
90° counterclockwise.
RIGHT DOOR,
turn pin 90˚
Push
Push
Once the door pins are reset, follow the
steps To reinstall the refrigerator doors.
For
counter-
clockwise
For
LEFT DOOR,
turn pin 90˚
clockwise