Master/Slave Mode; Show Mode - Equinox Systems Axis 50W Gobo Flower User Manual

Master/slave mode:

To set the master unit, press the "MENU" button and use the "UP" and "DOWN" buttons on the rear
NASt
of the unit to show
"DOWN" buttons to choose
Then select your desired program.
To set the other units in slave mode, press the "MENU" button and use the "UP" and "DOWN" buttons
on the rear of the unit to show
"UP" and "DOWN" buttons to choose either
direction to master). Press the "ENTER" button to confirm the setting.
The unit will now run in sequence with the master unit.
To exit out of any of the above options, press the "MENU" button.
Please ensure that all slave units are set to the same DMX channel mode as the master unit.

Show mode:

To access the show modes, press the "MENU" button and use the "UP" and "DOWN" buttons on the rear
SHNd
of the unit to show
"DOWN" buttons to choose between
and "DOWN" buttons to select the speed between
In Show 7 you can set a specific gobo. Press the "ENTER" button again and use the "UP" and "DOWN"
buttons to select the gobo between
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Sound active:
To access the sound active setting, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
and "DOWN" buttons to choose between
To exit out of any of the above options, press the "MENU" button.
Sound sensitivity:
To adjust the sound sensitivity, press the "MENU" button and use the "UP" and "DOWN" buttons on the
rear of the unit to show
and "DOWN" buttons to choose between
Value: 0 - 100 (0 = low, 100 = high)
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
on the LED display. Now press the "ENTER" button and use the "UP" and
ON OFF
choose
SLNd
on the LED display. Now press the "ENTER" button and use the
SL 1
on the LED display. Now press the "ENTER" button and use the "UP" and
SH 0
~
Go00 Go16
~
SOUN
on the LED display. Now press the "ENTER" button and use the "UP"
ON
or
SENs
on the LED display. Now press the "ENTER" button and use the "UP"
000
. Press the "ENTER" button to confirm the setting.
(copies master) ~
SH 7
. Now press the "ENTER" button and use the "UP"
SP00 SP99
~ .
.
OfF
. Press the "ENTER" button to confirm the setting.
100
~ . Press the "ENTER" button to confirm the setting.
Axis 50W Gobo Flower User Manual
Operating instructions
SL 2
(opposite mirror rotation
10