Fixture Temperature - Equinox Systems Axis 50W Gobo Flower User Manual

DMX signal lost:
To change what the unit does when the DMX signal is lost, press the "MENU" button and use the "UP"
and "DOWN" buttons on the rear of the unit to show
button and use the "UP" and "DOWN" buttons to choose between
LAst
(Hold the last DMX command) or
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
LED backlight:
To access the LED backlight setting, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
and "DOWN" buttons to choose between
To exit out of any of the above options, press the "MENU" button.
Display invert setting:
To access the display invert setting, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
and "DOWN" buttons to choose between
setting. To exit out of any of the above options, press the "MENU" button.
Manual mode:
To access manual mode, press the "MENU" button on the front of the unit to show
display. Now press the "ENTER" button and use the "UP" and "DOWN" buttons to choose between
diNN Stro
(Dimmer),
Press the "ENTER" button and use the "UP" and "DOWN" buttons to choose between
Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.

Fixture temperature:

To access the fixtures temperature, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
The unit will now display the fixtures temperature.
To exit out of any of the above options, press the "MENU" button.
Fixture hours:
To access the fixtures usage time, press the "MENU" button and use the "UP" and "DOWN" buttons on
the rear of the unit to show
The unit will now display the fixtures usage time (hours).
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
bLNd
LEd
on the LED display. Now press the "ENTER" button and use the "UP"
ON
or
dIsp
on the LED display. Now press the "ENTER" button and use the "UP"
dISP
Gobo
(Strobe), (Gobo) or
tENp
on the LED display. Now press the "ENTER" button.
FHrS
on the LED display. Now press the "ENTER" button.
Operating instructions
dNSt
on the LED display. Now press the "ENTER"
NASt
(Blackout).
OfF
. Press the "ENTER" button to confirm the setting.
dSIP
or . Press the "ENTER" button to confirm the
rOta
(Rotation).
Axis 50W Gobo Flower User Manual
(Master/Slave),
NANU
on the LED
000 255
~ .
11