Advertisement
Advertisement
Table of Contents
Related Manuals for Equinox Systems Swing Batten
Summary of Contents for Equinox Systems Swing Batten
- Page 1 Swing Batten User Manual Order code: EQLED033...
-
Page 2: Safety Advice
NO USER SERVICEABLE PARTS. pulling the power-cable. • This lighting fixture is for professional use only - it is • Make sure that the available mains supply voltage is not designed for or suitable for household use. The between 100~240V AC, 50/60Hz. product must be installed by a qualified technician in accordance with local territory regulations. The safety of • Make sure that the power cable is never crimped or the installation is the responsibility of the installer. The damaged. Check the equipment and the power cable fixture presents risks of severe injury or death due to fire periodically. hazards, electric shock and falls. • If the equipment is dropped or damaged, disconnect the • Warning! Risk Group 2 LED product according to mains power supply immediately and have a qualified EN 62471. Do not view the light output with optical engineer inspect the equipment before operating again. instruments or any device that may concentrate the beam. • WARRANTY: One year from date of purchase. OPERATING DETERMINATIONS If this equipment is operated in any other way, than those described in this manual, the product may suffer damage and the warranty becomes void. Incorrect operation may lead to danger e.g: short-circuit, burns and electric shocks etc. Do not endanger your own safety and the safety of others! Incorrect installation or use can cause serious damage to people and/or property. www.prolight.co.uk Swing Batten User Manual... - Page 3 Swing Batten The Swing Batten is a dynamic multi-beam effect dispensing eight intense, long-throw beams generated by the 10W CREE quad-colour LEDs. The batten cuts through haze with ease producing stunning beam effects. The 4 button menu system allows control of master/slave functions, and the fixture can be also be operated in sound active and DMX modes. • 8 x 10W CREE quad-colour LEDs (RGBW) • Beam angle: 4° • 16,100 Lux @ 2m (per LED, full on) • Individually controllable LEDs • Refresh rate: 400Hz • DMX channels: 6/12 or 16 selectable • Auto, sound active and master/slave modes • Tilt: 220° • 0-100% dimming and variable strobe • Quick release omega clamps included • 4 push button menu with LED display • PowerCON input/output • 3-Pin XLR input/output • Convection cooled Specifications Power consumption 100W Power supply 100~240V, 50/60Hz Fuse F3A 250V Dimensions 160 x 1065 x 80mm Weight 7.5kg Order code EQLED033 1065mm 80mm www.prolight.co.uk Swing Batten User Manual...
-
Page 4: Technical Specifications
POWER INPUT: POWER OUTPUT 100-240V~50/60Hz 01 - LCD display 06 - 3-pin DMX input 11 - Fuse F3A 250V In the box: 1 x fixture, 02 - Menu button 07 - 3-pin DMX ouput 12 - Rubber feet 1 x power cable, 03 - Up button 08 - PowerCON input 13 - Vents 1 x user manual & 04 - Down button 09 - PowerCON input 14 - Omega clamp mounts 2 x omega clamps 05 - Enter button 10 - On/off switch 15 - Safety bond point www.prolight.co.uk Swing Batten User Manual... -
Page 5: Sound Sensitivity
I d s P Display inversion press the “MENU” button. y e s t L t Tilt inversion t e S t Auto test h o u r Fixture hours u e r Firmware version r S e t Reset www.prolight.co.uk Swing Batten User Manual... - Page 6 CH10 LED 6 (use values from CH5) 058-061 CH11 LED 7 (use values from CH5) 062-063 RGBW CH12 LED 8 (use values from CH5) 064-079 Colour chase 1 080-095 Colour chase 2 096-111 Colour chase 3 112-127 Colour chase 4 128-143 Colour chase 5 144-159 Colour chase 6 160-175 Colour chase 7 176-191 Colour chase 8 192-207 Colour chase 9 208-223 Colour chase 10 224-239 Colour chase 11 240-255 Colour chase 12 000-255 Colour chase speed (slow-fast) www.prolight.co.uk Swing Batten User Manual...
- Page 7 208-223 Colour chase 10 CH10 LED 6 (use values from CH5) 224-239 Colour chase 11 CH11 LED 7 (use values from CH5) 240-255 Colour chase 12 CH12 LED 8 (use values from CH5) CH16 000-255 Colour chase speed (slow-fast) 000-007 No function 008-049 Show 1 050-091 Show 2 092-133 Show 3 CH13 134-175 Show 4 176-217 Show 5 218-247 Show 6 248-255 Sound active CH14 000-255 Show mode speed (slow-fast) www.prolight.co.uk Swing Batten User Manual...
-
Page 8: Master/Slave Mode
ShNd To access the show modes, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to choose the Sh 0 Sh 8 show you require from . Press the “ENTER” button to confirm the setting. To exit out of any of the above options, press the “MENU” button. Sound active mode: SoUn To access the sound active mode, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the sound mode on or off. Press the “ENTER” button to confirm the setting. Sens To adjust the sound sensitivity, press the “MENU” button on the front of the unit to show on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the sound sensitivity . Press the “ENTER” button to confirm the setting. Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity) To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk Swing Batten User Manual... -
Page 9: Dmx Setup
DATA cable (DMX cable) requirements (for DMX operation): This fixture can be controlled via DMX-512 protocol. The DMX address is set on the back of the unit. Your unit and your DMX controller require a standard 3-pin XLR connector for data input/output, see image below. Further DMX cables can be purchased from all good sound and lighting suppliers or Pro Light Concepts dealers. Please quote: CABL10 – 2m CABL11 – 5m CABL12 – 10m Also remember that DMX cable must be daisy chained and cannot be split. www.prolight.co.uk Swing Batten User Manual... -
Page 10: Line Termination
5-pin XLR (socket) 3-pin XLR (socket) Pin 1: GND (screen) Pin 1: GND (screen) Pin 2: Signal (-) Pin 2: Signal (-) Pin 3: Signal (+) Pin 3: Signal (+) Pin 4: N/C Pin 5: N/C www.prolight.co.uk Swing Batten User Manual... -
Page 11: Weee Notice
WEEE notice Correct Disposal of this Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed of with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk Swing Batten User Manual... - Page 12 Swing Batten User Manual...