Please note: These fixtures are intended for stage lighting and entertainment applications only, and are not intended for extended periods of use, including but not limited to house-light, industrial or architectural applications and should only be operated with short duty cycles. www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Page 3
SpectraPix Lithium Batten The SpectraPix Lithium Batten contains 224 SMD 5050 RGB LEDs divided into 16 segments. They feature a wide 120° viewing angle and feature a milky, frost effect front screen along with clear front screen to further expand the versatility of this fixture.
08 - 3-Pin XLR output 13 - IR sensor brackets/feet, 04 - Fuse F3A 250V 09 - Microphone 14 - IEC power output & 1 x power cable 05 - Earth point 10 - Function buttons www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Page 5
E - - - Program direction setting d i r - - - 3 v e r V - - - I n f o Software version t e n p - - - C www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Sound mode 3 118-121 Built-in program 27 Static colour selection (see list 000-255 122-125 Built-in program 28 on page 9 for static colours) 126-129 Built-in program 29 Program speed (slow-fast)/ 000-255 sound sensitivity (low-high) www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Page 7
000-255 Segment 13 red (0-100%) 000-255 Segment 8 & 16 red (0-100%) 000-255 Segment 13 green (0-100%) 000-255 Segment 8 & 16 green (0-100%) 000-255 Segment 13 blue (0-100%) 000-255 Segment 8 & 16 blue (0-100%) www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Page 8
000-255 Segment 7 blue (0-100%) 046-049 Built-in program 9 000-255 Segment 8 red (0-100%) 050-053 Built-in program 10 000-255 Segment 8 green (0-100%) 054-057 Built-in program 11 000-255 Segment 8 blue (0-100%) 058-061 Built-in program 12 www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Page 9
Built-in program 43 186-189 Built-in program 44 190-193 Built-in program 45 194-197 Built-in program 46 198-201 Built-in program 47 202-205 Built-in program 48 206-209 Built-in program 49 210-213 Built-in program 50 214-217 Built-in program 51 www.prolight.co.uk SpectraPix Lithium Batten User Manual...
“ENTER” button to confirm the setting and use the “UP” and “DOWN” buttons to select the flash speed St 0 St 9 between PLEASE NOTE: CHANGING THE STROBE WILL AFFECT THE STATIC COLOUR MODE. To exit out of any of the above options, press the “MENU” button. www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Page 11
To exit out of any of the above options, press the “MENU” button. Please ensure that all slave units are set to the same DMX channel mode as the master unit. www.prolight.co.uk SpectraPix Lithium Batten User Manual...
10 - Press the address button once, then use the up and down buttons to select the DMX address required 11 - Press the channel button once, then use the up and down buttons to select between 3/3/5/24/48 or 53 channel modes www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Page 13
Pixel zone orientation IEC input IEC ouput www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. www.prolight.co.uk SpectraPix Lithium Batten User Manual...
Need help?
Do you have a question about the SpectraPix Lithium Batten and is the answer not in the manual?
Questions and answers