Yamaha FJR13AY 2009 Service Manual page 669

YCC-S (Yamaha Chip Controlled-Shift) SYSTEM (FJR13AE only)
6. Select the diagnostic code number corresponding to the fault code number by pushing the hand shift
select button and operating the brake lever (or brake pedal) simultaneously.
7. Turn the main switch to "OFF" to cancel the diagnostic mode.
Diagnostic code table
Diagnos-
tic code Item
No.
Sh_ _61 Malfunction history
code display
• No history
• History exists
Data displayed on
meter (reference
value)
Sh_ _61 —
Fault code numbers If fault codes are stored in the malfunction
Sh_ _11–Sh_ _52 history, the hand shift select indicator light
• (First displays Sh_ will come on.
_61 for 6 seconds,
and then displays
each fault code
number that is
stored in the mal-
function history.
If more than one
code number is
detected, the dis-
play alternates ev-
ery two seconds
to show all the de-
tected code num-
bers.
When all of the
code numbers
have been shown,
the display re-
peats the same
process.)
8-186
Checking method