Reversing The Door - Electrolux T5130 Installation Manual

5 Reversing the door

Disconnect the power to the machine.
Demount the lower hinge and lift off the door.
Note!
Make sure to hold the door in position when loosening the hinge mounting.
Demount the upper hinge.
Demount the cover screws on the other side and mount them where the hinges was. Mount the hinges on the other
side where the cover screws was. Mount the lower hinge soft, with one screw first, in order to make it easier to place
the door back in position.
Demount the door handle and remount the screws. Mount the door handle on the opposite side using the existing
scews.
Remove the upper and lower pivot and mount them at the opposite side.
Installation manual
13
fig.W00180A
fig.W00182A
fig.W00183A