Parameters - Siemens SIMATIC ET 200eco PN M12-L Equipment Manual

EtherNet/IP
5.1 Functions/parameters/address space
Supported CIP objects for EtherNet/IP
The table below shows the CIP objects that the I/O device supports with EtherNet/IP.
Supported CIP objects
Identity object
Assembly object
Connection Manager object
TCP/IP Interface object
EtherNet Link object
LLDP Management object
LLDP Data Table object
Param object
5.1.2

Parameters

The table below shows the parameters for the I/O device digital inputs
DI 16x24VDC M12‑L 8xM12.
Table 5-1 Configurable parameters and their defaults (GSD file)
Parameters
Diagnostics: Low voltage 1L+
Diagnostics: Short-circuit
Diagnostics: Wire break detection
and alarm
Input delay
Hardware interrupt on rising edge •
Hardware interrupt on falling
edge
34
Value range
• Deactivated
• Activated
• Deactivated
• Activated
• Deactivated
• Activated
• 0.05 ms
• 0.1 ms
• 0.4 ms
• 0.8 ms
• 1.6 ms
• 3.2 ms
• 12.8 ms
• 20 ms
Deactivated
• Activated
• Deactivated
• Activated
I/O device digital inputs DI 16x24VDC M12-L 8xM12 (6ES7141-6BH00-0BB0)
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
FW 5.1.x or higher
Default Effective range with
configuration soft­
ware, for example,
Deactivated Channel
Deactivated Channel
Deactivated Channel
3.2 ms Channel
Deactivated Channel
Deactivated Channel
Equipment Manual, 03/2023, A5E46570510-AD
Remarks
Not supported
MFCT