Table of Contents
Advertisement
RKLC40-S scale specifications
Form (height × width)
Pitch
Accuracy (at 20 °C)
(includes slope and linearity)
Linearity
Supplied length
Material
Mass
Coefficient of thermal expansion (at 20 °C)
Installation temperature
End fixing
1
The scale and the end clamps must be installed following the installation process (see
34
QUANTiC
RKLC40-S incremental linear encoder system
™
0.15 mm × 6 mm (including adhesive)
40 μm
RKLC40-S ±15 µm/m
RKLC40H-S ±5 µm/m
RKLC40-S ±3 µm/m (achievable with 2 point error correction)
RKLC40H-S ±2.5 µm/m (achievable with 2 point error correction)
20 mm to 20 m (> 20 m available on request)
Hardened and tempered martensitic stainless steel fitted with a self-adhesive backing tape
4.6 g/m
Matches that of substrate material when scale ends fixed by epoxy mounted end clamps
+10 °C to +35 °C
Epoxy mounted end clamps (A-9523-4015)
Approved epoxy adhesive (A-9531-0342)
Scale end movement typically < 1 µm
'Applying the RKLC40-S scale'
1
on page
15
and
'Fitting the end clamps'
on page 16).
Advertisement
Table of Contents
