Changing the programme sequence
Adding or removing laundry
You can add or remove laundry items during the first few minutes
after the programme has started.
Status
Time left
Coloured
items
Add laundry
Touch the
Add laundry
If the message
longer possible to add items of laundry.
The programme will stop and the door will unlock.
Risk of chemical burns from detergent.
When adding or removing laundry during the main wash, your skin
may come into contact with detergent, particularly if the detergent
is dispensed externally.
Take care when placing your hands inside the drum.
If suds have come into contact with the skin, rinse off immediately
with lukewarm water.
Pull open the door.
Add laundry or remove individual items.
Close the door.
Touch the Start/Stop sensor.
The wash programme will continue.
The door lock will remain activated if the temperature in the drum is
above 50 °C. The door lock will not deactivate until the temperature
has dropped to below 50 °C.
11:02
0:49
h
Washing and
heating
Add laundry
selection area.
is not visible in the display, then it is no
37
Need help?
Do you have a question about the PWM 511 and is the answer not in the manual?
Questions and answers