Cleaning The Water Inlet Filters - Miele PWM 511 Operating And Installation Instructions

Hide thumbs Also See for PWM 511:
Table of Contents

Advertisement

Cleaning and care
Cleaning the
filters in the inlet
hoses
50
Remove the siphon from the  compartment and rinse under
1.
warm running water. Clean the siphon tube in the same way.
2.
Refit the siphon.
Clean the fabric softener channel using a brush and warm water.
Clean the siphon and fabric softener channel particularly
thoroughly after using liquid starch a few times. Liquid starch
results in clogging.
Use a bottle brush to remove detergent residues and limescale from
the jets inside the detergent dispenser drawer.

Cleaning the water inlet filters

The washing machine has filters to protect the water intake valves.
You should inspect the filters approximately every 6 months. Perform
this check more often if there are frequent interruptions to the external
water supply.
Turn off the tap.
Unscrew the water inlet hose from the tap.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PWM 511 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents