Table of Contents
Advertisement
UNIT SPECIFICATIONS
These incubators are 110 – 120 volt units. Please refer to the incubator data plate for individual
electrical specifications.
Technical data specified applies to units with standard equipment at an ambient temperature of
25°C and at nominal voltage. The temperatures specified are determined in accordance with
factory standard following DIN 12880 respecting the recommended wall clearances of 10% of the
height, width, and depth of the inner chamber. All indications are average values, typical for units
produced in the series. We reserve the right to alter technical specifications at all times.
W
EIGHT
Model
1915A
1925A
D
IMENSIONS
In Inches
Model
1915A
1925A
In Millimeters
Model
1915A
1925A
Shipping
570 lb / 259 kg
657 lb / 298 kg
Exterior W × D × H
38.8 x 34.3 x 76.9 in
41.5 x 34.3 x 90.3 in
Exterior W × D × H
985 × 871 × 1953 mm
1054 × 872 × 2293 mm
Net
406.0 lb / 184.0 kg
497.0 lb / 225.0 kg
Interior W × D × H
32.5 x 26.0 x 63.3 in
35.6 x 26.0 x 76.0 in
Interior W × D × H
825 × 660 × 1607 mm
904 × 660 × 1930 mm
39 |
P a g e
Advertisement
Table of Contents
