Part Identification Chart - ICON PRO-FORM 8.0 EX User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see
whether it has been preassembled. Extra parts may be included.
M8 Locknut
(43)–2
M6 x 50mm Screw
(89)–1
M4 x 16mm
Tablet Holder
Flat Head
Screw (92)–4
Screw (95)–1
M8 x 20mm
Screw (65)–4
M10 x 98mm Screw (53)–4
M4 x 16mm
Screw (72)–4
5
M4 x 22mm
Screw (84)–6
M8 x 50mm Bolt
(70)–2