Table of Contents
Advertisement
Available languages
Available languages
Using the hob
3.4 Flexible zone
• The front and rear cooking zone in the left
(cooking zones 1 and 2) form a flex zone.
The Flex Zone consists of two independent induction zones
that can be connected together as one large zone.
• If, during operation as one large zone, the cookware is moved
from the front part to the rear part (or vice versa) within the flexi-
ble area, the new position is automatically detected;
the power level of the zone on which the cookware was originally
placed is maintained and the part not covered by the cookware
is automatically switched off.
• Important note: In flex-zone operation, the cookware must be
placed in the middle of the zone, so that both cooking zones
are evenly covered.
Examples of good and bad placement of cookware:
Using as one large zone
• To operate the flex zone as one large zone,
press the flex zone key.
• The power level is set as with the other cooking zones
using the slider.
Use as two smaller independent zones
• To operate the flex zone as two independent single zones,
press the flex zone key again.
66
≥
160
×
≥ 240 mm
270
mm
Advertisement
Chapters
Table of Contents
