Functions - Adam Equipment Nimbus NBL Series Operating Manual

being displayed. If a multiplier of greater than 1.000 is entered, the number of decimal
places displayed will be reduced by one. This multiplier value will be saved for the next
use until it is changed by the user.
The balance displays the alternate weighing units with as much precision as possible. For
example, the NBL 423 balances (420g x 0.001g) could weigh up to:

10.4 FUNCTIONS

When weighing, the user can access the applications that have been enabled (see section
13.2).
The following applications are available depending on model:
Weighing
Parts counting
Percent weighing
Dynamic (animal) weighing (some models)
Density determination (Liquid & Solid) (some models)
The selectable functions can be enabled in supervisor mode and are selected by pressing
the [Mode] key to enter selection mode. The display will go blank and a small mode
symbol will appear at the top of the display, such as "
the [Up] and [Down] symbol keys to cycle through functions, and press [Setup] to confirm
your selection, or press one of the [0/T] keys at any time to return to normal weighing
mode.
© Adam Equipment Company 2017
Unit Maximum
g 420
mg 420000
kg 0.420000
ct. 2100
dwt 270.066
GN 6481.59
ozt 13.50330
oz 14.81505
Lb 0.92594
N 4.1188
d =
0.001
1
0.000001
0.005
0.001
0.02
0.00005
0.00005
0.00001
0.0001
Dynamic Density Solid
", " ", "
Parts
" etc. Use
22