Weighing Parameter Functions; F1- Baud Rate Setting - Adam Equipment CCEU-20 Manual

5.4 WEIGHING
The following functions control the weighing system in the scale. To set these
functions, follow the procedure-

Turn the scale on while holding the [Total]
release the key.
" Pin "
"

Enter the default access code "0000".
" Pin " " - - - - "
 Press the [Total] key. The first function is F1 Baud Rate Setting.

Press the [MC]
[Z/T] Esc
5.4.1 F1‐ Baud Rate Setting
To change the baud rate used with the serial interface, follow this procedure.

When the display is showing:
PARAMETER FUNCTIONS
" " "
" "
" F1 "
 key to advance to each of the other functions or
to return to normal operation after running a self-test.
" F1 "
26 | P a g e
" bAud " " SEt
" bAud " " SEt "
© Adam Equipment Company 2017
key down and then
"