Removing The Vehicle From Storage - Hisun VECTOR 500 Owner's Manual

the battery following the battery storage
8. procedures.
9. Keep the vehicle in a dry place where the
vehicle is sheltered from the elements.
Cover the vehicle.
10. Keep the vehicle indoors in a dry area that is
protected from sunlight and excessive heat.
If the vehicle must be stored outdoors. cover
it with a waterproof tarpaulin.
Put boards under the tires to keep
dampness away from tire.
Keep the tries out of direct sunlight and
extreme heat.
IMPORTANT:

When washing the vehicle, be sure to stop
the engine.
Allow sufficient time for the engine to cool
before washing.

Do not wash with a high-pressure car-
washing machine.

Cover the vehicle after the muffler and the
engine have cooled down.
REMOVING THE VEHICLE FROM
STORAGE
1. Check the tire air pressure and inflate the
tires if they are low.
2. Install battery before installing the battery,
Be sure it is fully charged.
3. Check to see if the fan works.
4. Check all fluid
transmission
transmission coolant and any attached
implements).
Periodic Service
levels (engine
oil, engine coolant,
5. Start the engine. Observe all gauges. If all
gauges are functioning properly and reading
normal, move the vehicle outside. Once
outside, park the vehicle and let the engine
idle for at least five minutes. Shut the engine
off and work around vehicle and make a
visual inspection looking for evidence of oil
or water leaks.
6. With the engine fully warm up. Release the
parking brake and test the brakes for proper
adjustment as you move forward. Adjust the
brake as necessary
oil,
10-20