Replacing Radiator Hose (Water Pipes); Replacing Fuel Hose; Replacing Brake Master Cylinder; Replacing Front Brake Seal - Hisun VECTOR 500 Owner's Manual

Hide thumbs

Table Of Contents

Table of Contents

Refer to SEA J1034 standard, more

specifically also to SAE J814c.

IMPORTANT:



When the antifreeze is mixed with water, the

antifreeze mixing ratio must be less than

50%.

Freezing point

VOL%

Anti-freeze

℃

-24

-37

*At 1.013×10

Pa (760mmHg) pressure (atmospheric).

A higher boiling point is obtained by using a

radiator

pressure cap which permits the development of

pressure within the cooling system.

Adding the LLC

Add only water if the mixture reduces in

amount by evaporation.

If there is a mixture leak, add the LLC of the

same manufacturer and type in the same

mixture percentage.

* Never add any long-life coolant of different

manufacturer.(Different brands may have

different additive components, and the

engine may fail to perform as specified.)

When the LLC is mixed, do not employ any

radiator cleaning agent. The LLC contains

anticorrosive agent. If mixed with the

cleaning agent, sludge may build up,

adversely affecting the engine parts.

The vehicle's genuine long-life coolant has a

service life of 2 years. Be sure to change the

Periodic Service

Boiling point

℃

-12

106

222

-34

108

226

coolant every 2 years.

NOTE:



The

above

standards that necessitate a minimum glycol

content in the concentrated antifreeze.



When the coolant level drops due to

evaporation, add water only to keep the

antifreeze mixing ratio less than 50%. In

case of leakage, add antifreeze and water in

the specified mixing ratio before filling into

the radiator.