HAMPTON BAY GG-11110-AAA Use And Care Manual page 6

(continued)
Assembly
3
Attaching the back right staight beam and side straight beam to the post
□
Attach the back right straight beam ( E) and side straight beam 1 ( K ) to the post ( A) using the M6 x 20 mm bolts ( AA) with M6 Allen wrench ( F F ) .
□ Attach support bar ( P) to the post ( A) and side straight beam 1 ( K ) using the M6 x 20 mm bolts ( AA) with M6 Allen wrench ( F F ) .
NOTE:
Please ensure all bolts are aligned and assembled
correctly. Fully tighten the bolts.
4
Attaching the side straight beam and front left straight beam to the post
□
Attach the side straight beam 1 ( K ) and front left straight beam ( H) to the post ( C) using the M6 x 20 mm bolts ( AA) with M6 Allen
wrench ( F F ) .
□ Attach support bar ( P) to the post ( C) and side straight beam 1 ( K ) using the M6 x 20 mm bolts ( AA) with M6 Allen wrench ( F F ) .
□ Attach support bar ( P) to the post ( C) and front left straight beam ( H) using the M6 x 20 mm bolts ( AA) with M6 Allen wrench ( F F ) .
NOTE:
Please ensure all bolts are aligned and assembled
correctly. Fully tighten the bolts.
AA
E
AA
AA
C
AA
K
AA
P
A
AA
H
AA
P
K
AA
6
AA
AA