Summary of Contents for HAMPTON BAY HARBOR GFS01250A
Page 1
THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this gazebo. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Table of Contents Table of Contents ..........2 Pre-Assembly ............3 Warranty ..............2 Planning Assembly ..............3 What is Covered ..............2 Hardware Included ...............3 What is Not Covered ............2 Package Contents ..............4 Safety Information ..........2 Assembly ..............5 Care and Cleaning ..........13 Warranty Warranty 2 YEAR FRAME AND FABRIC WARRANTY WHAT IS COVERED We warrant the frame and fabric to be free of manufacturing defects to the original purchaser for two years.
Pre-Assembly PLANNING ASSEMBLY Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: More than one person may be required to assemble this product. HARDWARE INCLUDED NOTE: Hardware not shown to actual size. Part Description Quantity...
Pre-Assembly (continued) PACKAGE CONTENTS Part Description Quantity Part Description Quantity Upper canopy hub J Pillar A Lower canopy hub K Pillar B Foot edge Pillar C Panel Beam M Beam E Small fabric cover Top tube F Large fabric cover Side wall Top tube G Short canopy spoke...
Assembly Assembling the corner pillars Screw the decorative balls (S) onto the top of the pillars (B and C). Line up the bolt holes on the pillar (A, B, and C) with corresponding bolt holes on the panels (D). Attach the panels (D) to the pillars (A, B, and C) using M6x25 combination bolts (AA). Attach the foot edge (L) to pillars (A, B, and C) using M6x15 combination bolts (BB).
Page 6
Assembly (continued) Attaching the beams Insert beam (E) into beam (M) and line up the bolt holes. Secure beam (E) to beam (M) using M6x15 combination bolts (BB). Repeat step 2 for the remaining sets of beams (E and M). NOTE: Loosely tighten all bolts using the Hex wrench (EE).
Page 7
Assembly (continued) Attaching the beams to the pillars Line up the bolt holes on the ends of the connected beams (E and M) with the corresponding bolt holes on the pillars (A). Attach the connected beams (E and M) using M6x15 combination bolts (BB). NOTE: Make sure that the round tubes on the beams are facing inward.
Page 8
Assembly (continued) Assembling the upper canopy frame Insert the top tubes (F) into the top tubes (G) making four long canopy spokes. Insert the four top tubes (G), of the long canopy spokes, into the four long tubes of the canopy hub (K). Insert the short canopy spokes (H) into the four short tubes of the lower canopy hub (K).
Page 9
Assembly (continued) Placing the large fabric cover Place the large fabric cover (O) on top of the assembled frame. Fully extend the large fabric cover (O) to the end of the spokes.
Page 10
Assembly (continued) Assembling the upper canopy frame Insert the upper canopy spokes (I) into the upper canopy hub (J). Then insert the upper canopy spokes (I) into each of the top tubes (G).
Page 11
Assembly (continued) Securing the canopy top and attaching the side walls Place the small fabric cover (N) on the upper canopy spokes (I) and fully extend the small fabric cover to the ends of the uppe r canopy spokes (I). Put up the two side walls (P) on the beams (E and M) The harbor gazebo package includes two privacy side NOTE:...
Page 12
Assembly (continued) Hanging the netting Put up the netting (Q) onto the beams (E and M) with the plastic rings (R). E&M...
Assembly (continued) Stabilizing the gazebo Insert the corkscrew ground spikes (GG) through the hole on the foot edge (L) of the connected pillars (A, B, and C). Twist the corkscrew ground spikes down into the ground until the foot edge (L) is secure. Pound the ground spikes (DD) through the other hole of foot edge (L) of the connected pillars (A, B, and C) until the ground spik s ( DD ) secures the foot edge (L) to the ground.
Page 14
Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.