D-Link nuclias connect DAP-2620 Quick Installation Manual
Ac1200 wave 2 wall-plated access point
Hide thumbs
Also See for nuclias connect DAP-2620:
- Quick installation manual (8 pages) ,
- User manual (94 pages)
Related Manuals for D-Link nuclias connect DAP-2620
Summary of Contents for D-Link nuclias connect DAP-2620
- Page 1 Quick Installation Guide Nuclias Connect AC1200 Wave 2 Wall-Plated Access Point DAP-2620 Additional documentation is also available on the D-Link website...
- Page 2 Contents English...
-
Page 3: Before You Begin
If any of the above items are damaged or Red (Solid) - Device boot up missing, please contact your local D-Link reseller. has failed Note: No power adapter is supplied with this product. To power the unit, use an 802.3af PoE Table 1: LED Description Switch or an 802.3af PoE Injector. -
Page 4: Interface Connectors
Table 2: Interface Description Manual Configuration Note: D-Link recommends manually configuring the device before mounting it. The management computer, DHCP server and DAP-2620 must be in the same subnet. Use one of the following methods to access the... - Page 5 Connecting Wirelessly Align and place the mounting plate on top of the anchors and use the included Connect the management computer to screws to secure the mounting plate to the default SSID of the DAP-2620, “dlink”. the surface. Manage the access point from a computer. Enter dap2620.local in the address field of your browser.
-
Page 6: Federal Communication Commission Interference Statement
Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 5.92 watts Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant... - Page 7 This device is for indoor use only when using all channels in the 5.15 to 5.25 GHz frequency range. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this device.
-
Page 8: Technical Support
Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link Nuclias product or marketing information, please visit the website http://www.dlink.com or https://www.nuclias.com. The D-Link Limited Lifetime Warranty information is available at http://www.dlink.com/warranty VCCI-B dlink.com/support... - Page 9 Notes...
- Page 10 Notes...
- Page 12 Ver. 1.00(WW)_130x183 2019/12/12...
Need help?
Do you have a question about the nuclias connect DAP-2620 and is the answer not in the manual?
Questions and answers