Authentication Settings- Passcode - D-Link NUCLIAS CONNECT DIS-3650AP User Manual

Table of Contents

Web User Interface

After selecting Passcode as the Authentication Type, we can configure the Passcode authentication that will be applied to each wireless client in

this network.

Session

Enter the session timeout value here. This value

timeout(1-1440) :

can be from 1 to 1440 minutes. By default, this

value is 60 minutes.

Band :

Select 2.4GHz or 5GHz.

SSID Index :

Select the SSID for this Authentication.

Authentication Type :

Select the captive portal encryption type here.

Options to choose from are Web Redirection,

Username/Password, Passcode, Remote

RADIUS, LDAP and POP3. In this section we'll

discuss the Passcode option.

Web Redirection State :

Default is Disable or select Enable to enable the

website redirection feature.

URL Path :

Select whether to use either HTTP or HTTPS

here. After selecting either http:// or https://,

enter the URL of the website that will be used

in the space provided.

IPIF Status :

Select to Enable or Disable the Captive Portal

with its IP interface feature here.

VLAN Group :

Enter the VLAN Group ID here

Get IP From :

Static IP (Manual) is chosen here. Choose this

option if you do not have a DHCP server in

your network, or if you wish to assign a static

IP address to the DIS-3650AP. When Dynamic IP

(DHCP) is selected, the other fields here will be

Authentication Settings- Passcode

Table of Contents