RCA CC180 Owner's Manual page 6

Thank you f 'r choosing an RCA camcorder.
You have selected a precision-engineered camcorder designed to
give you years o performance and enjoyment.
Although your c mcorder is very simple to use, it is important
that you read an carefully follow the instructions in this manual
until you are co pletely familiar with the proper operating
procedures. If y u should experience a problem, always refer
first to "Trouble hecks" on pages 32-33. Many times a simple
solution is all th t is needed, and it could save you a costly
service call. If y, ur camcorder should require service during the
warranty period, ~ refer to page 34 for a description of what we
will do and inst&tions on how to request service.
camcorder and ticcessories.
e packed with the camcorder.
materials and box in case you ever need to
The items sywn below are packed with your camcorder. If
l
any of the ityms are missing or appear damaged, contact
your RCA dealer immediately.
WARNING: NIC L
CADMIUM BA RY
MUST BE DISPO ED
OF PROPERLY.
S t o c k N o . F 096s
4
Shoulder Strap
Stock No. AC!391
O u t p u t Cabk
Stock No. VAA016 1
Lithium battery. Must be disposed
Ckek Battery:
handle punctured or leaking batteries.
ay cause burns or personal injury.
death or injury if swallowed.
hands of children.
2
accessories and information
A C A d a p t e r / C h a r g e r
Stock No. CpSO16
Cassette Adapter
Stock No. VCAll5
Cassette Adapter Battery
( S i z e " A A " 1 . 5 V o l t )
2 . Install the clock battery.
(Press down on tab and pull
Install the clock battery. Details on setting the date, time, and
age are on pages 12 and 13.
Open the battery compartment on the back of the camcorder.
l
Insert the clock battery with the plus (+) side facing out
l
the tabs in the battery compartment.
under
Press the battery compartment cover shut until it locks into
l
place.
Notes: The
battery should last for about one year.
waming'appears in the electronic viewfinder, this battery
needs to be replaced.
3. Attach a power supply to the camcorder.
Attach a power supply to the camcorder-either the
adapter/charger or charged battery.
Adapter/Charger:
Connect the power
connector's small plug into
the DC OUT jack on the
adapter/charger. Align the
reference mark on the
power connector with the
mark on the camcorder.
Hold the power connector
flush against the back of
the camcorder and slide it
in the direction of the arrow as shown. Plug the
adapter/charger's plug in to an operating outlet. Details are
on page 6.
Charged Battery:*
Attach the battery to the
camcorder. Hold the battery
flush against the camcorder
and slide it in the direction of
the arrow. Details are on
pages 6- 7.
be charged
m u s t
to open.)
When the
before it can be used the