Viewftnder Playback; Tracking - RCA CC180 Owner's Manual

POWER
and Indi
Viewfinder play ack the simplest way to watch tapes using
IS
the camcorder. ?his met od is generally used only to review
there is no sound. To play back a tape
finder, follow these step4
Y MOD& button to flip the CAMERA/PLAY
4. Press the P
Y button to begin playback.
ack, press and release the FF (fast forward) or
CAMERA/PLAY
MODE Control
Panel in PLAY
MODE Position
Buttons
CAMERA/PLAY MODE
Control Panel in PLAY
MODE P o s i t i o n
PLAY Button PAUSE Button
STOP Button
FF (Fast Forward) Button
\
During playback, press the PAUSE button to "stop the
l
action", and view one frame of the tape. Press the PLAY
button to return to normal playback.
Caution: Pause is designed for momentary interruptions
and should not be used for an extended period of time.
If the camcorder remains in the pause mode for more
than five minutes, it will automatically enter the stop
mode, and then turn off to prevent excessive tape wear.
5. Press the STOP button when you are finished.
If there are streaks in the playback picture, press either
Notes:

TRACKING

button to move the streaks up or down and out of the
picture. Simultaneously press both
tracking to its preset center.
During playback, streaks may appear in the playback picture.
Press either of the tracking buttons to move the streaks up or
down and out of the picture.
During stop-action playback, pressing one of the TRACKING
l
buttons may reduce picture "jitter" (picture bouncing up and
down). Some "jitter" is normal during stop-action viewing.
Simultaneously press both TRACKING buttons to return tracking
to its preset center.
TRACKING
The buttons may have no effect on tapes recorded on
Note:
other camcorders or VCR's
RACKING - a n d +
Buttons
TRACK/NC
buttons to return