RCA CC180 Owner's Manual page 16

W h e n e v e r o n e f the displays appears in the viewfinder, it will
tape. You can choose to record only the date,
both the date a d time, or neither.
as described on page 2.
the display fou are setting.
I
1 2
the camcorder. Slide the POWER
power. The POWER
MODE control panel is
SET CLOCK will appear in the
Electronic Viewfinder
SELECT Button
MODE Button
5 Press one of the DATlQTIME SET buttons repeatedly until the
correct month appears.
6. Press the SELECT button. The flashing cursor will move to
the next part of the display.
7. Repeat steps 5 and 6 until you have entered the correct
month, day, year, hour including AM or PM, and minutes.
8. Press the SELECT button again to remove the flashing cursor
from the display and start the camcorder's internal clock.
The clock will not start until you remove the flashing cursor
from the viewfinder.
Correcting Date or Time
To correct the date or time, press the MODE button to display
the time and date in the viewfinder. Then press the SELECT
button until the incorrect digit is flashing. Press one of the
SELECT button until the flashing cursor is removed from the
display. The internal clock will not start until you remove the
flashing cursor from the viewfinder.