Table of Contents
Advertisement
OPERATION
Button 10: Heater Mode
Press to cycle through the heat output options.
1 press: Co.A = Cool blow setting
2 press: H.Lo = Low heat setting
3 press: H.HI = High heat setting
4 press: no.H = No Heat
Whilst in heater mode after selecting low or high heat setting, press the – and + buttons to select the temperature
you want the room to reach. Note: if the room temperature is already higher than the temperature selected, the
heater will not activate. To switch between ℃/℉ hold down the – and + buttons for 3 seconds.
Open Window Detection is an innovative eco feature that detects a rapid drop in room temperature caused by an open
window. The warning word "OPn" will be displayed on the screen and the heater will be turned off. If the room
temperature rises or the remote control is operated manually, the heater will return to its normal working state.
Button 11: Sound Effect
Press to open the open the sound effect menu.
1 press: S.on = Sound effect on
2 press: no.S = Sound effect off
Whilst in the sound effect menu, press the plus and minus buttons to increase and decrease the volume - 1 bar is the
quietest setting, 5 bars is the loudest setting.
Button 13: Ambient Lighting (if appliance is fitted with optional Ambient Lighting Kit)
Repeatedly press to turn on ambient lighting and cycle through the different colour options.
eco
Button 14: Eco Mode
Press to activate Eco mode. This mode will reduce the brightness of all lighting modes and limit the heat output to
low setting, resulting in reduced energy consumption. Press the button a second time to exit Eco mode.
APP CONTROL
Visit your device app store (iOS or Android) to download the TUYA SMART APP. Once installed follow the procedure
below to pair the device with your appliance.:
Step 1. Start the app and click "Add Device" on screen. Select "Small Home Appliance" from the list, then select
"Heater (Wi-Fi)".
Step 2. Ensure the appliance is powered on then press and hold the
button on the appliance until you hear 3
beeps. At the same time the button will flash and the fuel bed will flash.
Step 3. Follow the instructions on the app to input your home network details. Note, your device must also be
connected to the same home network you wish to connect the appliance to.
Once connected you can fully control your appliance and also programme a weekly timer that features Adaptive
Start Control – a smart home device that gauges the current temperature of the room and anticipates the time
required to heat it to a desired temperature. When in weekly timer mode, the appliance will automatically
determine the time to turn on the heater to ensure that the set temperature is met at the time required (up to 45
minutes prior to the set time).
17
Advertisement
Table of Contents
