Vision E-line solus VS220 Instruction Manual page 3

Before installation, check that all parts included are undamaged. If the appliance is
damaged, check with the supplier before installation and operation. If the supply cord is
damaged, it must be replaced by the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
CAUTION: In order to avoid a hazard due to the inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
Do not use the appliance outdoors.
Do not use the appliance in the immediate surroundings of a bath, a shower or a swimming
pool.
Do not leave the appliance unattended during use.
Do not run the mains cable under carpet, rugs, etc.
Do not locate the appliance immediately below or in front of a fixed socket outlet or connection
box.
Do not install the appliance using an extension cord.
Do not install the appliance in an open flue.
Do not insert any objects into the appliance.
Do not operate the appliance near flammable materials or fire.
Do not clean the appliance with abrasive cleaners.
Do not use this fire in rooms that have explosive gas in them (for example petrol), or if you
are using solvents, glue, aerosol spray or in flammable paints, as these may catch fire.
Do not use this appliance in small rooms when they are occupied by persons not capable of
leaving the room on their own, unless constant supervision is provided.
Do switch off and unplug the appliance from the main socket when not in use or before
cleaning and maintenance.
Do keep the appliance away at least 1 meter from furniture, curtains or other combustible
material when in use.
Do ensure the plug remains easily accessible after installation of the appliance.
Do use this appliance on a horizontal and stable surface.
IMPORTANT INFORMATION
3