Table of Contents
Advertisement
OPERATION
REMOTE CONTROL
Ensure that 2 AAA batteries are inserted into the remote
control handset. The battery power level is indicated by
the column of bars to the right side of the temperature
display when the appliance is in standby mode. 5 bars
indicates the batteries are full, 1 bar indicates the batteries
are empty and need to be replaced immediately.
Remote Control Setup
Press and hold the Standby button on the appliance until
you hear two beeps, release the button. Press Standby
button on the remote control handset and you will hear
one beep. The remote is connected with the appliance.
Button 1: Preset Mode
Repeatedly press to cycle through the 6 preset fire modes
(+ 3 user defined presets if programmed).
On screen Pr.1 = Autumn Campfire
On screen Pr.2 = Ember Glow
On screen Pr.3 = Inferno
On screen Pr.4 = Noir
On screen Pr.5 = Fire & Ice
On screen Pr.6 = Nebula
On screen Pr.7 = User Preset
On screen Pr.8 = User Preset
On screen Pr.9 = User Preset
There are 3 preset slots allocated for the user to save
personalised e-fire creations. Simply choose the flame
colour and brightness level, the fuel bed colour and brightness level and fuel bed down light colour and brightness
level. One you have selected your desired combination, press and hold the Preset Mode button for 3 seconds until
the LCD displays Pr.7. Press – and + buttons to select a slot number between 7-9. Press and hold the Preset Mode
button for 3 seconds to confirm the preset.
Button 2: Standby
Turns on the appliance with the last used settings without any heat. Places the appliance into standby mode with all
features turned off.
Button 3&9: Minus & Plus
Use to navigate through different on-screen menus.
Button 4: Flame Speed
Press once to enter flame speed menu – SPd will show on the LCD screen. Press the plus and minus buttons to adjust
the flame speed. The flame speed is indicated on screen by bars – 1 bar is the slowest setting; 5 bars is the fastest
setting.
FIG. 18
IMPORTANT: The remote control handset must
be left in the same room as the appliance as it
houses the thermostat that regulates heat output.
15
Advertisement
Table of Contents
