Vision E-line solus VS220 Instruction Manual page 26

Now the app will prompt you to reset the device this is referring to placing your fire into pairing mode. Before
tapping next you will need to put your appliance into pairing mode. Ensure the fire is switched on before
commencing and press and hold the Wi‐Fi button on your fire located on the underside of the top righthand corner
of the fire, as shown below until fuel bed flashes red.
Flasing Red – In pairing
Once the fire is placed in pairing mode with a flashing red fuel bed tap the next button on the app and choose the Blink
Quickly button this will then begin to search for the fire, when it has successfully paired the fire fuel bed will display a
solid green colour.
26