App Control - Vision e-line SOLUS VS75 User Manual

Bu on 10: Heater Mode
Press to cycle through the heat output op ons.
1 press: Co.A = Cool blow se ng
2 press: H.Lo = Low heat se ng
3 press: H.HI = High heat se ng
4 press: no.H = No Heat
Whilst in heater mode a er selec ng low or high heat se ng, press the – and + bu ons to select the
temperature you want the room to reach. Note: if the room temperature is already higher than the
temperature selected, the heater will not ac vate. To switch between ℃/℉ hold down the – and + bu ons
for 3 seconds.
Open Window Detec on is an innova ve eco feature that detects a rapid drop in room temperature caused
by an open window. The warning word "OPn" will be displayed on the screen and the heater will be turned
off. If the room temperature rises or the remote control is operated manually, the heater will return to its
normal working state.
Bu on 11: Sound Effect
Press to open the sound effect menu.
1 press: S.On = Sound effect on
2 press: no.S = Sound effect off
Whilst in the sound effect menu, press the plus and minus bu ons to increase and decrease the volume - 1
bar is the quietest se ng, 5 bars is the loudest se ng.
Bu on 12: Ambient Ligh ng (if appliance is fi ed with op onal Ambient Ligh ng Kit)
Repeatedly press to turn on ambient ligh ng and cycle through the different colour op ons.
Bu on 13: Eco Mode
Press to ac vate Eco mode. This mode will reduce the brightness of all ligh ng modes and limit the heat
output to low se ng, resul ng in reduced energy consump on. Press the bu on a second me to exit Eco
mode.
Visit your device app store (iOS or Android) to download the TUYA SMART APP. Once installed follow the
procedure below to pair the device with your appliance.:
Step 1. Start the app and click "Add Device" on screen. Select "Small Home Appliance" from the list, then
select "Heater (Wi-Fi)".
Step 2. Ensure the appliance is powered on then press and hold the
hear 3 beeps. At the same me the bu on will flash and the fuel bed will flash.
Step 3. Follow the instruc ons on the app to input your home network details. Note, your device must also
be connected to the same home network you wish to connect the appliance to.
Once connected you can fully control your appliance and also programme a weekly mer that features
Adap ve Start Control – a smart home device that gauges the current temperature of the room and

APP CONTROL

15
OPERATION
bu on on the appliance un l you