Remote Control - Vision e-line SOLUS VS75 User Manual

Ensure that 2 AAA ba eries are inserted into the
remote control handset. The ba ery power level is
indicated by the column of bars to the right side of
the temperature display when the appliance is in
standby mode. 5 bars indicates the ba eries are
full, 1 bar indicates the ba eries are empty and need
to be replaced immediately.
Remote Control Setup
Press and hold the Standby bu on on the appliance
un l you hear two beeps, release the bu on. Press
Standby bu on on the remote control handset and
you will hear one beep. The remote is connected
with the appliance.
Bu on 1: Preset Mode
Repeatedly press to cycle through the 6 preset fire
modes(+ 3 user defined presets if programmed).
On screen Pr.1 = Autumn Campfire
On screen Pr.2 = Ember Glow
On screen Pr.3 = Inferno
On screen Pr.4 = Noir
On screen Pr.5 = Fire & Ice
On screen Pr.6 = Nebula
On screen Pr.7 = User Preset
On screen Pr.8 = User Preset
On screen Pr.9 = User Preset
There are 3 preset slots allocated for the user to save personalised e-fire crea ons. Simply choose the flame
colour and brightness level, the fuel bed colour and brightness level and fuel bed down light colour and
brightness level. Once you have selected your desired combina on, press and hold the Preset Mode bu on
for 3 seconds un l the LCD displays Pr.7. Press – and + bu ons to select a slot number between 7-9. Press
and hold the Preset Mode bu on for 3 seconds to confirm the preset.
Bu on 2: Standby
Turns on the appliance with the last used se ngs without any heat. Places the appliance into standby mode
with all features turned off.
Bu on 3&9: Minus & Plus
Use to navigate through different on-screen menus.
Bu on 4: Flame Speed
Press once to enter flame speed menu – SPd will show on the LCD screen. Press the plus and minus bu ons
to adjust the flame speed. The flame speed is indicated on screen by bars – 1 bar is the slowest se ng; 5 bars
is the fastest se ng.

REMOTE CONTROL

FIG.19
IMPORTANT: The remote control handset must
be le in the same room as the appliance as it
houses the thermostat that regulates heat output.
13
OPERATION