Download Print this page

Timer Operation - Sharp AH-XP10UXD Operation Manual

Hide thumbs

Advertisement

Table of Contents

TIMER OPERATION

TIMER OFF
1
Press the TIMER OFF button and set
the time as desired.
• The orange TIMER lamp (
• The timer setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
NOTE:
• Timer duration can be set from a minimum half an hour to a maximum of 12 hours. Up to 9.5 hours,
you can set in half-hour increments, and from 10 to 12 hours, in 1-hour increments.
• The TIMER OFF and TIMER ON can not be set together.
• When the temperature is set during timer setting, the temperature will show in the display for 5 sec-
onds and then return to the timer display.
• If a power failure occurs while the TIMER is set, the TIMER setting will be cancelled and will not be
retrieved even after the power is restored.
TIMER ON
• The unit will turn on prior to the set time to allow the room to reach the desired temperature by the
programmed time. (Awaking function)
) will light up.
) will turn off.
SENSOR
1
SENSOR
CANCEL
EN-11
TIMER ON
1
Press the TIMER ON button and set
the time as desired.
• The orange TIMER lamp (
• The timer setting will count down to show
the remaining time.
TO CANCEL
Press the CANCEL button.
• The orange TIMER lamp (
) will light up.
) will turn off.
SENSOR
1
SENSOR
CANCEL

Hide quick links:

Advertisement

Table of Contents
loading

  Related Manuals for Sharp AH-XP10UXD