Installation Instructions - Midea MAP10S1CWT User Manual

Installation Instructions

Choosing the Right Location
Recommended Installation
Note About Fluorinated Gasses
• This air-conditioning unit is a hermetically sealed unit that contains fluorinated
gasses. For specific information on the type of gas and the amount, please refer
to the relevant label on the unit itself.
• Service, maintenance and repair of this unit must be performed by a certified
technician.
• Product recycling must be done according to local regulations.
Page 12
Your installation location should meet the following
requirements:
• Make sure that you install your unit on an even
surface to minimize noise and vibration.
• The unit must be installed near a grounded plug,
and the Collection Tray Drain (found on the back
of the unit) must be accessible.
• The unit should be located at least 12" (30 cm)
from the nearest wall to ensure proper air
conditioning. The horizontal louver blade should
be at least 19.7" (50 cm) away from obstacles.
• DO NOT cover the Intakes, Outlets or Remote
Signal Receptor of the unit, as this could cause
damage to the unit.
NOTE
All the illustrations in the manual are for
explanation purpose only. Your machine may be
slightly different.
The unit can be controlled by the unit control
panel alone or with the remote control. See the
remote control Instruction for details.