Table of Contents
Advertisement
[Setup via recorder's main monitor]
Confirm the hard disk drive information [HDD information]
Capacity of the hard disk drive and the running time of this product or the extension unit (EXT1 ~ EXT5), time
range of the recorded images, etc. will be displayed.
Screen in Single mode
(The display contents in RAID5/RAID6 mode
are also similar)
Note:
• HDD information will not be updated while the
"Maintenance" page is being displayed.
• The recovery progress information is displayed
next to the HDD operation mode display during
the mirroring recovery or the RAID recovery.
• If the recording group is set, [Camera recording
group check] is displayed and you can check it.
[Operation mode of HDD]
Operation mode of HDD will be displayed to the right
of "HDD information" on the upper left of the table in
the screen.
Refer to page 75 for further information.
[Capacity]
Displays the capacities of the hard disk drives.
[Operation]
Displays the operating time of the hard disk drives.
[Status]
Displays the statuses of the hard disk drives.
Normal: Hard disk drives that are operating normally.
The number indicates the order of recording.
Playback-only: Hard disk drives for playback use
only (Recording is unavailable.)
Removed: Hard disk drives that are excluded
from operation due to fault
Error: Hard disk drives that have become faulty
during the format process
Blank: No HDD connected
Added: HDD cannot be used until it is formatted
Screen in Mirroring mode
[Recorded time range]
Displays the time range of the images recorded on
the hard disk drives.
Note:
• When using in Mirroring mode/RAID5 mode/
RAID6 mode, "Operation time" will be displayed
for each hard disk drive respectively, while
"Capacity"/"Status"/"Recorded time range" will
be displayed together for multiple hard disk
drives.
[Overwrite cycle]
Calculates and indicates the overwriting cycle of the
hard disk drives, based on the past recording perfor-
mance (the date & time of the oldest recorded data,
the current date & time and the capacity of the hard
disk drive).
Note:
• While overwriting recording is being performed,
the overwriting cycle will be calculated based on
the date & time of the oldest recorded data and
that of the newest recorded data.
• The more often the recording was performed in
the past, the more accurate the calculation of
overwriting cycle will be.
• When the recording conditions are changed or
when data is automatically deleted, the overwrit-
ing cycle will not be indicated accurately.
• Overwrite cycle will not be displayed when setting
the recording group.
65
Advertisement
Table of Contents
