Table of Contents
Advertisement
[Operation via recorder's main monitor]
Sub monitor (monitor for display of live images only)
Important:
• Configuration and operation of the recorder from the sub monitor is not possible.
Live images from the specified cameras can be displayed on 1-screen or 4-screen/9-screen/16-screen/32-screen
on the sub monitor. When several cameras are selected on 1-screen or 4-screen/9-screen/16-screen, camera
images will be switched sequentially at the selected switching interval (sequence display). In addition, camera
images can be switched according to the signal input triggered by a terminal alarm. (☞ Page 49)
Note:
• The date & time and camera also appear on the camera image displayed on the sub monitor, but some
characters may be cut off.
• To display images, it is necessary to select the cameras to be displayed in the setup menu in advance. The
recorder is not configured to display camera images by default.
• Depending on the selected switching interval, a black screen may appear before camera images are dis-
played.
• When the secret view function is selected, the single screen on the main monitor or selected images on a
multiscreen will not be displayed.
• While "1-screen live sequence" is being performed, the secret view images will be skipped (not displayed).
• During 9-screen or 16-screen live sequence operation, the black screen is displayed when the camera
image is switched.
• The image of a camera where an error has occurred will not be displayed.
• The size of displayed images will be fit into the screen regardless of the aspect ratio at the default setting.
When the aspect ratio of the sub monitor (BNC) is 4:3, the vertically long images will be displayed compared
with the images of the sub monitor (HDMI).
• Depending on whether enabling or disabling the re-encoding transmission, the frame rate or the resolution
of camera images on the sub monitor may vary, or the sub monitor may momentarily go black.
104
Advertisement
Table of Contents
