Table of Contents
Advertisement
[Setup via recorder's main monitor]
Change the registered information [Registered information]
Click the [Setup >] button for "Registered information" on the [Camera registration] tab to display the following
items.
After editing the settings, click the [OK] button to save the settings and return to the [Camera registration] tab.
[Camera]
Up to 128 cameras can be connected. By registering
the licenses, number of the cameras can be
increased to 64, 96 or 128.
[Model]
The model of a registered camera will be displayed.
(Blank: Camera is not registered)
Click the [▼] button to select the camera model from
the camera categories. Refer to the "readme.txt" on
the provided CD-ROM for camera categories.
It is unnecessary to change it for normal use.
[Option]
Assign the operational mode of the camera having a
specific function due to the difference in function of
the camera.
[Address]
An address already in use will be displayed. The
address can be changed using the on-screen key-
board. Enter up to 255 alphanumeric characters
including hyphens (-) and periods (.).
Note:
• Entering "http://" is not necessary if the host name
is entered.
[Compression]
Select the image compression method.
H.265(1)/ H.265(3)/ H.265(4)/ H.264(1)/ H.264(3)/
H.264(4)/ MJPEG
Note:
• Assignment example by the application of camera
stream
① Recording by compression of H.264, 1-screen
live display, browser display: H. 264(1)
② Sub-stream recording by compression of
H.264, live multi-screen display: H.264(2)
③ Recording by compression of H.264 or H.265,
1-screen live display, browser display:
H.264(1), H.264(3), H.264(4), H.265(1), H.265(3),
H.265(4)
④ Sub-stream recording by compression of
H.264 or H.265, live multi-screen display:
H.264(2), H.265(2)
• When selecting "MJPEG" for "Compression", the
live image transmission rate and the frame rate
will be changed automatically to "5 ips".
(☞ Page 35)
• When selecting "MJPEG" for "Compression",
images whose aspect ratio is 16:9 cannot be
selected. (☞ Page 38)
• When selecting "H.264(n)" or "H.265(n)" for
"Compression", it will become possible to select
"XF" in the image quality setting.
• Depending on the model of the camera, the cam-
era may reboot when the compression method is
changed. The reboot will be detected as a com-
munication error, but that is not a malfunction.
[User name]
Enter the user name for accessing the cameras and
logging in using the on-screen keyboard (☞ Installation
Guide Page 8). Register the user name whose
access level is "Administrator".
[Password]
Enter the password to be used for the user whose name
has been registered as "User name" (☞ Installation
Guide Page 8). (Up to 32 alphanumeric characters)
[Port No.]
Set a port number from 1 - 65535 for use by the camera.
Default: 80
Note:
• Enter the port number in five digits, right aligned.
(Example: When the port number is 80, enter
"00080".) The leading zeros are omitted here.
15
Advertisement
Table of Contents
