Panasonic WJ-NX400G-54000T6 Operating Instructions Manual page 222

Network disk recorder
Table of Contents

Advertisement

POP 3
A protocol for receiving e-mail stored on a server on
the Internet or an Intranet.
POP 3 Server
A server that supports POP3, currently the most
widely used mail sending protocol.
Port forwarding
A function that takes packets that arrive to a specific
port number from the Internet and forwards them to
the set camera. The recorder only forwards HTTP
packets.
Port number
A sub address set below the IP address to connect
multiple parties simultaneously for communication
(TCP, UDP, etc.) on the Internet.
Primary (DNS) server
DNS servers usually have more than 2 systems and
the primary server is the main system.
Private (IP) address
IP address assigned when connecting primarily to
LAN. Private IP addresses can be assigned freely on
a network and do not require a formal application.
However, because private IP addresses cannot be
used to access the Internet, a router or other device it
is necessary to assign a global IP address.
Protocol
A set of rules that allows the exchange of data
amongst different types PCs with information. The
Internet uses the TCP/IP protocol as its base and
information is transferred following http and ftp proto-
cols depending on the application.
QXGA
Resolution with 2048×1536 pixels.
RAID5
Even if a HDD becomes faulty, correct data can be
read from the remaining HDDs since 3 or more HDDs
are logically regarded as a single HDD and parity data
(error correction code data) is automatically attached.
Recorded images can be recovered by replacing the
failed HDD. 3 or more HDDs are required.
RAID6
Even if 2 HDDs become faulty, recorded images can
be recovered using the remaining HDDs since RAID6
has 2 parity data (error correction code data). 4 or
more HDDs are required.
Resolution (Image capture size)
Resolution refers to the degree of fineness and quality
of the camera pictures recorded by this product.
In this product, it indicates the number of pixels used
in the image displayed on the screen. A horizontal
resolution of 640 pixels and a vertical resolution of
480 pixels is expressed as 640×480.
Router
Placed in between different networks, a router sends
data to the proper destination via network. If data on
the network is addressed to an external network,
routers send the data to the outside of the network
after judging the optimum sending route.
Schedule recording
Function that automatically starts video and audio
recording on a preset time schedule.
SD memory backup, SD memory data
The SD memory backup is a function of the camera
to save images on the SD memory card inserted in
the camera when the recorder fails to communicate
with the camera during the set schedule. The SD
memory data means its recorded image.
Secondary (DNS) server
DNS servers usually have more than 2 systems and the
secondary server is the sub system. If there is trouble
with the primary server, the secondary server takes over.
Smart coding (GOP control)
A control method of the camera to reduce the amount
of the transmitted data by prolonging the refresh inter-
val of the image when the motion in the image is little.
SMTP (Simple Mail Transfer Protocol)
A protocol for sending e-mail on the Internet or an
Intranet. Used when transferring mail between serv-
ers or when clients send mail to the server.
SMTP authentication (Simple Mail Transfer
Protocol authentication)
SMTP mail transfer protocol appended with a user
authentication function. It authenticates passwords
and user accounts between SMTP servers and cli-
ents. Both SMTP servers and clients must support
SMTP authentication.
222

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-nx400k/gWj-nx400k/gjWj-nx400kWj-nx400g-4000t4

Table of Contents