Table of Contents
Advertisement
[Setup via recorder's main monitor]
Change the password of camera [Management of camera user]
Click the [Setup >] button of "Management of camera user" on the [Camera registration] tab to display the
following screen.
[Settings]
Select items to set up.
Register camera administrator: Registers a user name
and password to a camera whose administrator is not
registered. Enter a user name/password.
Note:
• Cameras that already have the User name/
Password registered cannot register another User
name/Password.
Change password: Changes the password of the
camera user registered to the recorder only. Enter a
password.
■ Camera selection
Select the camera to which the settings are sent.
Mark the checkbox of the camera to which the set
user name and password are sent.
(When "Register camera administrator" is selected in
the "Settings", you cannot select cameras whose
administrators have already been registered.)
[Transmission] button
Transmit the settings to the camera. Once transmis-
sion is completed and the setting has been applied to
the camera, "OK" will be displayed in the "Results"
field. If the display reads "Authentication error", etc.,
the camera connection or the setting may have failed.
[Back] button
Click the button after completing the settings. The
screen returns to the [Camera registration] tab.
Note:
• For user name and password, enter those of camera
administrator rights according to the specifications
of the camera. (Please refer to the operating instruc-
tions of the camera.)
• The entered user name and password are set as
registered information of the applicable camera
when the settings to the camera is completed.
• Click [Exit] button when you set the user name
and password.
14
Advertisement
Table of Contents
