Table of Contents
Advertisement
[Operation via recorder's main monitor]
Playback by designating a timeline
When playback starts, the date & time operation panel will change to playback display.
This section explains how to use the timeline display to designate a playback date & time by operating the play-
back slider.
Date & time operation panel (playback display)
Scale selection button
Display range selection
Playback slider
The playback display shows available recorded images and displays these on a timeline sorted by type. It is
possible to change the type of recorded images displayed on the timeline, change the timeline scale, and des-
ignate the recorded image to play.
[REC Event]
Mark the checkboxes of different types of recorded
images and display them on a timeline. If changes are
made during playback, playback will be paused and a
new search will be performed.
Schedule: Schedule-recorded images will be dis-
played in pink
Event: Event-recorded images will be displayed in red
[Information]
When this box is checked, the time zone recorded
when the VMD function was activated (motion was
detected in an image) will be displayed in blue on the
timeline. (Playback will be paused.)
Periods for which no recorded images are available
will be displayed in black.
Note:
• To display the result of the motion detection
search, cameras that support the motion detec-
tion search function are necessary.
Refer to the "readme.txt" on the provided CD-ROM
about the supported cameras. Refer to the operating
instructions of the camera in use for further information.
button
[Time-saving playback]
When it is checked, the recorded image is automati-
cally played up to 4 times faster if there is no move-
ment in the image. Remove the check mark if you
want to play the image at normal speed.
If you activate the time-saving playback (☞ Page 48),
the screen is displayed with the box always checked.
Note:
• To use the time-saving playback, cameras that
support the motion detection search function are
necessary.
Refer to the "readme.txt" on the provided
CD-ROM about the supported cameras. Refer to
the operating instructions of the camera in use for
further information.
(If the setting for "VMD information addition" is off,
or the image recorded by Panasonic cameras
does not support time-saving playback, the image
will be played in the fast playback mode regard-
less of motion.)
139
Jump buttons
Jump interval
Display range selection
button
Timeline
Advertisement
Table of Contents
