Stop Buzzer Beeping - Panasonic WJ-NX400G-54000T6 Operating Instructions Manual

[Operation via recorder's main monitor]
Event action
Alarm action
Send a mail that notifies of
an event occurrence
Provide an alarm notification
to a PC according to the
Panasonic alarm protocol
setting
Display the images on a
1-screen when an alarm
occurs
*1 ○: Takes action regardless of the setting, ●: takes action in accordance with the setting, ×: takes no action
*2 When "On" is selected for the "Attach alarm information" setting of the camera, i-VMD type information will
be displayed in the alarm log. For further information, refer to the operating instructions of the camera in
use.

Stop buzzer beeping

The buzzer sounding to announce an alarm or error can be stopped from the recorder's front panel.
Step 1
Press the [BUZZER STOP] button.
→ The buzzer will stop. →
Note:
• The buzzer can also be stopped by canceling the alarm action or error action. (☞ Page 129) The [BUZZER
STOP] button does not reset any of the other alarm actions.
Description
An e-mail notifying of the event and its date & time
(alarm mail) will be sent to registered e-mail
addresses (up to 4). (☞ Page 37, 55)
When an event occurs, a notification will be sent to a
PC in accordance with the settings made under
[Panasonic alarm protocol]. (☞ Page 37, 56)
Display the images recorded by the camera
associated with the alarm number on a 1-screen
128
1
Mode*
A B C
× ×
●
× ×
●
× ×
●