Playback Point Operation Area; [Hdd] Tab - Panasonic WJ-ND300A/G Setup Instructions

Playback Point Operation Area

q Indicates the start time and the end time of a down-
load or a A-B repeat. (Refer to the Operating
Instructions (PDF).)
[Start] button
Indicates the start time for the time and date of
the image to be downloaded.
[End] button
Indicates the end time for the time and date of
the image to be downloaded.

[HDD] Tab

[REW] button
Fast reverse playback will be performed. Playback
speed for fast reverse playback will be changed in the
following order each time this button is clicked: Step2
(Approx. 4x) → Step3 (Approx. 8x) →
Step4 (Approx. 16x) → Step5 (Approx. 32x) →
Step6 (Approx. 48x) → Step7 (Approx. 96x)
[PREV RECORD] button
Skips to the previous recorded image and plays it.
[REV PLAY] button
Reverse playback of a recorded image will be per-
formed.
[PLAY] button
Playback of a recorded image will be performed.
[NEXT RECORD] button
Skips to the next recorded image and plays it.
q
w
Indicates the time and date of a marked point. Use
this button to designate the desired time and date of
a recorded image to be played. (Refer to the
Operating Instructions (PDF).)
e
Skips to the latest recorded time of a recorded
image from the currently displayed camera channel
and plays it.
[FF] button
Fast playback will be performed. Playback speed will be
changed in the following order each time this button is
clicked: Step2 (Approx. 4x) → Step3 (Approx. 8x) →
Step4 (Approx. 16x) → Step5 (Approx. 32x) →
Step6 (Approx. 48x) → Step7 (Approx. 96x)
[PREV IMAGE] button
The previous frame will be displayed when this button is
clicked during playback/pausing.
[PAUSE] button
Playback will be stopped when this button is clicked dur-
ing playback. Playback will be resumed when this but-
ton is clicked during pausing.
[STOP] button
Stops playback and displays a live image.
[NEXT IMAGE] button
The next frame will be displayed when this button is
clicked during playback/pausing.
w
[GO TO DATE] button
[GO TO LAST] button
e
23