SuperLoader™ 3 Quick Start Guide
Figure 5 Sliding Autoloader
into Rack
Figure 6 Front Alignment
10
5 While the other installer holds the front end of the autoloader, secure the front end of
the autoloader to the rack using four rack screws (two per tab) as shown in
Tighten the screws just enough to secure the autoloader to the front rails.
Front rail
Rack screws
Tab (one per side)
6 Install four screws (two per side) to secure the support brackets to the autoloader
brackets (see
figure
7).
Rack Mounting the Autoloader
Autoloader bracket
Support bracket
Autoloader
(front)
figure
6.