Checking The Tire Pressure - Toro 30495TC Operator's Manual

3
Adjusting the Left, Front
Caster Wheel
No Parts Required
Procedure
Adjust the left, front caster wheel to the outside
position for 183 cm (72 inch) cutting units and to the
inside position for 152 cm and 158 cm (60 inch and 62
inch) cutting units (Figure
1. Bolt
2. Position for 183 cm (72
inch) cutting units
4

Checking the Tire Pressure

No Parts Required
Procedure
Check the tire pressure; refer to
Pressure (page 44).
Important:
Maintain pressure in all tires to
ensure a good quality-of-cut and proper machine
performance. Do not underinflate the tires.
3).
Figure 3
3. Nut
4. Position for 152 cm and
158 cm (60 inch and 62
inch) cutting units
Checking the Tire
g346839
13