Drive System Maintenance; Checking The Tire Pressure; Replacing The Caster Wheels And Bearings - Toro 30495TC Operator's Manual

Figure 40
1. Side panel cover
Figure 41
g004495
2. Latch
decal110-9796nc
Drive System
Maintenance

Checking the Tire Pressure

Service Interval: Every 50 hours
Check the pressure after every 50 operating hours or
monthly, whichever occurs first
Maintain the air pressure in the front and rear tires.
The correct air pressure is 124 kPa (15 psi) in the
rear tires and 103 kPa (25 psi) in the caster wheels.
Uneven tire pressure can cause an uneven cut.
Check the tires when they are cold to get the most
accurate pressure reading.
Replacing the Caster
Wheels and Bearings
1. Obtain a new caster-wheel assembly, cone
bearings, and bearing seals from your authorized
Toro distributor.
2. Remove the locknut from the bolt
44
(Figure 42).
Figure 42
(Figure
g001055
43).