Attachments/Accessories; Before Operation; Before Operation Safety - Toro 30495TC Operator's Manual

Ground clearance
Weight, with 72-inch Side-Discharge Cutting unit (Model 30354 or 30481)
Weight, with 60-inch Side-Discharge Cutting unit (Model 30456)
Weight, with 72-inch Base Cutting unit (Model 30353)
Weight, with 62-inch Base Cutting unit (Model 30457)
Note:
Specifications and design are subject to
change without notice.

Attachments/Accessories

A selection of Toro approved attachments and accessories is available for use with the machine to enhance
and expand its capabilities. Contact your Authorized Service Dealer or authorized Toro distributor or go to
www.Toro.com for a list of all approved attachments and accessories.
To ensure optimum performance and continued safety certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be
dangerous, and such use could void the product warranty.
Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Shut off the engine, remove the key (if equipped),
and wait for all movement to stop before you leave
the operator's position, Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that operator-presence controls, safety
switches, and guards are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the blades, blade bolts, and cutting
assemblies are in good working condition.
Replace worn or damaged blades and bolts in sets
to preserve balance.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
General Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Shut off the engine, remove the key, and wait
for all movement to stop before you leave the
operator's position. Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
•
Know how to stop the machine and shut off the
engine quickly.
•
Check that operator-presence controls, safety
switches, and guards are attached and functioning
properly. Do not operate the machine unless they
are functioning properly.
•
Before mowing, always inspect the machine to
ensure that the blades, blade bolts, and cutting
assemblies are in good working condition.
Replace worn or damaged blades and bolts in sets
to preserve balance.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
throw.
19
15 cm (6 inches)
934 kg (2,060 lb)
900 kg (1,985 lb)
876 kg (1,932 lb)
855 kg (1,884 lb)