Table of Contents
Advertisement
CARE AND MAINTENANCE
WATER TANK
1.
Remove the Tank Cover, and dispose
of the water.
Tank Cover
▶
2.
Wash the inside of the Water Tank.
NOTE
• If the dirt is heavy, please dissolve neutral
detergent in lukewarm water and wash.
3.
Dry the tank with a soft cloth.
Check the float.
4.
Install the Tank Cover.
(About once a week)
EN-12
BACK PANEL / SENSOR
(About once every 2 weeks)
Remove the dust
gently with a
cleaning tool such
as a vacuum cleaner.
How to clean and remove heavy dirt.
NOTE
Back Panel
1. Add a small amount of neutral
detergent to water and soak for
about 10 minutes.
CAUTION
Do not give excessive pressure to
the back panel when scrubbing it.
2. Rinse off the neutral detergent with
clean water.
3. Completely dry the filter in a well-
ventilated area.
Sensor Filter
1. Remove the Back Panel.
2. Remove the sensor filter.
3. If the sensor filter is very dirty, wash
it with water and dry it thoroughly.
Sensor Filter
MAIN UNIT
(About once a month)
Wipe with a dry, soft cloth.
Do not wash with water.
Advertisement
Table of Contents
